| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Feature: | Flame-Retardant, Anti-Static, Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Alkali-Resistant, Skid-Resistance, Wear-Resistant, High Temperature-Resistance |
| Tensile Strength: | Strong |
| Material: | Rubber |
| Type: | V Belt |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Company Description
BINLONG COMPANY was founded in 2008 , is a professional supplier of power transmission belts from Sanmen, China. It is widely used in automotive, agriculture, coal, metallurgy, mining, engineering machinery, oil, textile and light industry, construction and cement and other fields. The spirit of "high quality, excellent service, continuous improvement" as business philosophy, the company since its inception, the products are exported to over 30 countries in Europe, North America, South America, Middle East, Southeast Asia, such as Italy, Spain, Poland, the United States, Argentina, South Africa, Thailand, Indonesia etc.The quality has been widely recognized by customers.
Product Description
Applications:
Primarily used as replacement on industrial drives. The classical belts are recommended in special applications such as V-flat drives. In the same manner these belts are advantages where reverse idlers have to be used, because of smaller heights.
| Product Name | Wrapped V Belt/ Classical Belt/V Belt |
| Transportation | express / by air/ by sea |
| Using | power transimission |
| Cord | polyester ,Kevlar |
| Angle | 40 Degrees |
| Usage | Power Transmission Equipment |
| Keyword | v belt |
|
FeaturesDesigned for excellent flexibility Meets the requirements of small pully diameters High power transmission efficiency Reduced noises Smooth running |
We manufacture the entire range of Classical V-belts. The nominal length designation for these belts is inside length (Li) in inches. The length conversion factors are mentioned in the specification sheet below.
Heavy Duty Wedge V-Belts
Wedge belts have been the result of a continuous thrust by the manufacturers and users on higher power transmissions with reduced space requirements. Wedge belts can transmit higher power to the extent of 1.5 to 2 times the classical belts with the same top width. This has been achieved by dimensional changes, apart from better cord construction used and the optimum placement of the cord line which provides the best support to the cord while in motion. During manufacturing we pre-stretch the cord before building into the belt. It offers lower stretch properties in the drive. This way we are able to reduce minimum installation and take up allowances significantly. For the efficient performance of wedge drive it is essential that the proper tension be maintained in the drive, failure to maintain the same will render the purpose of wedge belts ineffective.
|
|
Features: • Top width to height ratio is 1.2:1 • Temperature range: -18 to +80 • Maximum recommended belt speed is 30 m/s* • Less deformation of the belt cross-section when in contact • with the pulleys ensures better contact between the belt flanks and the pulley grooves |
Applications:
Primarily used as replacement on industrial drives. The classical belts are recommended in special applications such as V-flat drives. In the same manner these belts are advantages where reverse idlers have to be used, because of smaller heights.
Standards, Dimensions & Product Range:
We manufacture the entire range of wedge belts. The nominal length for SP wedge belts is designated as pitch length (Lp) in millimeter
|
Section |
Top Width |
Thickness |
Angle |
|
(mm) |
(mm) |
(Deg) |
|
|
SPZ |
9.7 |
8 |
40 |
|
SPA |
12.7 |
10 |
40 |
|
SPB |
16.3 |
13 |
40 |
|
SPC |
22 |
18 |
40 |
|
3V |
9.5 |
8 |
40 |
|
5V |
15 |
13 |
40 |
|
8V |
25 |
23 |
40 |
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}